MTB-6048 Epoxy Art Casting Resin,3:1

1)What is the shelf life duration for MTB-6048 Epoxy Art Casting Resin?
It is recommended that you use up Craft Resin within six months after opening. However, unopened Craft Resin can last for up to twelve months.
2)What kind of coverage should be expected?
Craft Resin has an ability to level out to a thickness of about 30 mm, on a flat surface. Thus, if you’ll like to have an art piece covered in more resin, then you spread multiple 3mm thick resins over it.
For deep cast,more than 30mm,we will recommend our MTB-2103 deep casting resin,as it is can be 5-10cm per pour.
3)What is the working time/cure time of MTB-6048 Epoxy Art Casting Resin?
Usually, the catalysed resin can be used within a period of 45 minutes, before it becomes quite too firm to spread over surfaces. However, the time duration for this to occur is even shorter in winter cold areas, or in the situation that you had initially warmed up the resin and hardener in warm water. Curing generally may require up to 24 hours to occur, but again, this may be a little faster in the warmer use environment.
4)What is the resin and hardener mixing ratio?
Ideally, the mixing ratio for both resin and hardener is 3:1.Our MTB-6048,it is fast cure and crystal clear
5)What is MTB-6048 Epoxy Art Casting Resin suitable for?
Our MTB-6048 Epoxy Art Casting Resin is suitable for: Moulding/Casting/Potting/Encasing purposes,such as crafts,table,jewellry and so on. 6)How to melt the bubbles?
You can use torch or fire gun.