Parking Lot Flake Chip Epoxy Floor
- MTBJZJ
- Shenzhen,China
- 1-5 Day
- 50,000kgs/Week
Parking Lot Flake Chip Epoxy Floor
Can be installed on concrete floors in one day
Low VOC green products
Non-yellowing
Extremely fast-drying
Can be retarded for more pot-life
Penetrates deep into porous concrete
Abrasion resistant flooring system
Resistant to most chemicals
High-build finish
Hot tire resistant
MTBJZJ Parking Lot Flake Chip Epoxy Floor
The MTBJZJ Epoxy Flake Flooring System is an easy-to-install commercial epoxy floor coating that is applied over commercial concrete floors.
The MTBJZJ? Epoxy Flake Flooring kits include enough flake to broadcast them over the wet epoxy flooring to the point of rejection. This installation process allows the installer to throw the flake onto the wet epoxy flooring to the point where the floor is entirely covered up by the flake. The results look great every time because the installer scrapes off the loose flake, leaving a uniform blanket of flake on the entire concrete floor.
The Whole Process you need
--MTB-3327 Epoxy Primer
--MTB-3328 Epoxy Middle Coat
--MTB-3329 Epoxy Top Coat
--Broadcast Color Flake Chips
MTBJZJ Parking Lot Flake Chip Epoxy Floor
Can be installed on concrete floors in one day
Low VOC green products
Non-yellowing
Extremely fast-drying
Can be retarded for more pot-life
Penetrates deep into porous concrete
Abrasion resistant flooring system
Resistant to most chemicals
High-build finish
Hot tire resistant
MTBJZJ Parking Lot Flake Chip Epoxy Floor
Commercial concrete floors
Residential concrete floors
Anywhere else epoxy flake flooring is needed
MTBJZJ Parking Lot Flake Chip Epoxy Floor
Item | Epoxy Resin(A) | Hardener/B | Thickness |
MTB-3327 Epoxy Primer | 0.1KGS/㎡ | 0.05KGS/㎡ | @1mm |
MTB-3328 Epoxy Middle Coat | 0.5KGS/㎡ | 0.25KGS/㎡ | @2mm |
MTB-3329 Epoxy Top Coat | 0.1KGS/㎡ | 0.05KGS/㎡ | @1mm |
Flake Chips | 0.25kgs~0.3kgs/㎡ |
We have the below package for your reference
---1Gallon/barrel,3gallons/kit
---5kgs/barrel,15kgs/kit
---20kgs/barrel,60kgs/kit